Pilot RC - Sbach 342 V2 - 103'' colour 11 - Joe Scheme - 100-130cc ( 2.63m)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

CAD $2,135.99

Availability: In stock

SKU:

23353

Distributor Number

342-103V2-11

Manufacturer Number

342-103V2-11

PILOT-RC SBACH 342 V2 – 103" (2.63 m)

Legendary Performance. Modern Precision.

The iconic Sbach 342 returns in an all-new V2 design, combining smooth, precise flight characteristics with outstanding 3D and Extreme Aerobatic (XA) capabilities.

Built with advanced wood, fiberglass and carbon-fiber construction, featuring genuine Oracover covering and Pilot-RC's quick-assembly systems.

Specifications

Wingspan: 103.9" (2,647 mm)
Length: 102" (2,603 mm)
Flying Weight: Approx. 28.4 lb (12.9 kg)
Recommended Engine: 100–130cc gas or equivalent electric

INCLUDED

Complete ARF airframe with pre-installed hinges and canopy
Carbon-fiber landing gear, tailwheel assembly and wing tubes
Wheels, axles and wheel pants
Fiberglass control horns and prepared pushrods with ball links
Fuel tank, tubing, fuel dot and breather valve
Matching 5" carbon spinner
Transparent spare lower cowling section for engine cutout preparation

NOT INCLUDED

Engine, exhaust system or electric power system
Servos (high-torque servos required)
Transmitter and receiver
Propeller
Batteries and power distribution system
Servo extensions and additional installation accessories

Available through Aircraft Modelers Research (AMR), Canada's exclusive Pilot-RC distributor.

Be the first to review this product

Details

Sbach 103 Inches - Specifications and Requirements
AIRCRAFT SPECIFICATIONS
Manufacturer	Pilot-RC	Model	Sbach 342 V2
Wingspan	103.9" (2,647 mm)	Length	102" (2,603 mm), including 5" spinner
Wing Area	1,875 sq. in. (12,100 cm²)	Flying Weight	Approx. 28.4 lb (12.9 kg)
Construction	Wood, plywood, fiberglass and carbon fiber	Covering	Genuine Oracover (Ultracote)
Flying Style	Precision Aerobatics, 3D and Extreme Aerobatics (XA)
POWER & ELECTRONICS
Gas Engine	100-130cc	Electric Power	Equivalent electric power system
Total Servos	8 (gas configuration)	Recommended Servos	Pilot-RC PW48AH
Aileron Servos	4 (2 per wing)	Elevator Servos	2 (1 per elevator half)
Rudder Servo	1	Throttle Servo	1 (gas only)
Servo Torque	48 kg-cm at 8.4V	Servo Speed	0.11 sec / 60 degrees at 8.4V
Servo Arms	Pilot-RC 1.6" aluminum	Radio System	Not included
Receiver	Not included	Receiver Power	Not included
ASSEMBLY & CONSTRUCTION
Wing Attachment	Quick-assembly system	Stabilizer Attachment	Tool-free quick-assembly
Canopy Attachment	Quick-release locking system	Hinges	Factory glued and pinned
Cowling	Internally mounted	Landing Gear	Carbon fiber, removable sides
Rudder Control	Push-pull system	Engine Mounting	Laser-engraved mounting reference
Exhaust Installation	Open construction for canister installation	Wings & Stabilizers	Removable for transportation
BUILD INFORMATION
Center of Gravity (CG)	215 mm (8.46")	CG Measurement	Back from wing leading edge at fuselage
CG Reference	A laser-engraved CG emblem is located inside the fuselage, near the wing tube, indicating the exact center of gravity position.
SERVO EXTENSION WIRE REQUIREMENTS
Throttle	1 x 35 cm	Rudder	1 x 130 cm
Aileron - Nearest Servo	1 x 25 cm per wing	Aileron - Furthest Servo	1 x 75 cm per wing
Ailerons - Total	2 x 25 cm + 2 x 75 cm	Elevators	2 x 145 cm (1 per servo)
Total Extensions (Gas)	8	Total Extensions (Electric)	7
Installation Note	Aileron extension lengths are intended to reach directly to the receiver.
INCLUDED EQUIPMENT
Airframe	Complete ARF airframe	Landing Gear	Carbon-fiber main gear
Tailwheel	Tail-gear assembly	Wing Tubes	Included
Control Horns	Fiberglass	Pushrods	Prepared with ball links
Fuel System	Tank, tubing, fuel dot and breather valve	Wheels & Axles	Included
Wheel Pants	Included	Canopy	Pre-mounted
Hinges	Pre-installed, glued and pinned	Spinner	Matching 5" carbon spinner
Spare Cowling	Transparent lower cowl section for engine cutout preparation
NOT INCLUDED / REQUIRED
Aileron Servos	4 required	Elevator Servos	2 required
Rudder Servo	1 required	Throttle Servo	1 required (gas only)
Additional Accessories	As required for installation