E-flite - Power 60 Brushless Outrunner Motor, 400Kv - EFLM4060A

Skip to the end of the images gallery

Skip to the beginning of the images gallery

CAD $208.79

Availability: Out of stock

SKU:

2810

Distributor Number

EFLM4060A

Manufacturer Number

M4060A

Be the first to review this product

Details

Key Features

Equivalent to a 60-size glow engine for 6 to 10 lb (2.7 to 4.5 kg) airplanes
Ideal for 46-size 3D airplanes up to 7 lb (3.2 kg)
Ideal for models requiring up to 1200 watts of power
High-torque, direct-drive alternative to inrunner brushless motors
Includes mount, prop adapters and mounting hardware
External rotor design—6mm shaft can easily be reversed for alternative motor installations
Slotted 14-pole outrunner design
High-quality construction with ball bearings and hardened steel shaft
Quiet, lightweight operation
NOTE: Not recommended to use with E-flite 80-Amp Pro Switch-Mode ESC (EFLA1080B)

Overview

The Power 60 is designed to deliver clean and quiet power for 60-size sport and scale airplanes weighing 6 to 10 pounds (2.7–4.5 kg), 46-size 3D airplanes up to 7 pounds (3.2 kg), or models requiring up to 1200 watts of power. It’s an especially good match for Hangar 9 .60-size warbirds like the Corsair 60 (HAN2575), P-47D Thunderbolt 60 (HAN2975), P-40 Warhawk 60 (HAN2850), P-51 Mustang 60 (HAN2375), P-51 Miss America 60 (HAN2775) and .46-size 3D planes such as the Hangar 9 Funtana 40 (HAN1975) or Seagull Harrier 46 (SEA3025).

Product Specifications

Type:	Brushless outrunner
Size:	Replacement for 60-size glow engines
Bearings or Bushings:	One 6 x 15 x 5mm Bearing, and Two 6 x 12 x 4mm Bearing
Wire Gauge:	14
Recommended Prop Range:	14x8 to 16x10
Voltage:	18.5 to 28.8
RPM/Volt (Kv):	400
Resistance (Ri):	.06 ohms
Idle Current (Io):	2.70A @ 10V
Shaft Diameter:	6mm (.24 in)
Overall Length:	62mm (2.40 in)
Weight:	380 g (13.0 oz)
Overall Diameter:	50mm (2.00 in)
Diameter:	50mm (2 in)
Length:	62mm (2.4 in)
Continuous Current:	55A
Maximum Burst Current:	65A (15 sec)
Cells:	16–24 Ni-MH/Ni-Cd or 5–7S Li-Po
Speed Control:	60A brushless

Detailed Information

Hardware is included with the purchase of this motor.

Examples of Airplane Setups:

NOTE: All data measured at full throttle. Actual performance may vary depending on battery and flight conditions.

Hangar 9 P-51 Miss America (HAN2775)

Motor: Power 60

ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)

APC 15x10E

Battery: Thunder Power PRO LITE 6000mAh 6S3P (THP60003S3PPL x2 in series)

Flying Weight w/Battery: 8.8 lb

Amps	Volts	Watts	Input Watts/Pound	RPM
56.0	21.3	1195	136	7375

Expect very strong performance with a great balance of thrust and top speed. Average duration is approximately 8 to 15 minutes depending on throttle management.

Seagull Harrier 3D 46 (SEA3025)

Motor: Power 60

ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)

Prop: APC 16x8E

Battery: Thunder Power PRO LITE 4200mAh 6S2P (THP42003S2PPL x2 in series)

Flying Weight w/Battery: 6.4 lb

Amps	Volts	Watts	Input Watts/Pound	RPM
50.5	21.0	1060	165	6975

Expect very strong performance with unlimited vertical and plentiful power for hovering and 3D aerobatics. Average duration is approximately 8 to 15 minutes depending on throttle management.

Needed to Complete

60A brushless ESC
5S–7S Li-Po or 16- to 24-cell Ni-MH/Ni-Cd
14x8 to 16x10 prop

Articles, Reviews, How-Tos & More

More Information

Distributeur numero

EFLM4060A

Numéro Manufacturier

M4060A

Country

China

Brand

E-flite

UPC

605482773864

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account