Pilot RC - LASER - 60'' Color 08 - 20% Electric

SPECIFICATIONS:

FEATURES:

NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
NEW! Patented quick assembly system for wings.
NEW! Patented quick assembly system for canopy. Especially useful for electric version, fast battery change!
NEW! Patented quick assembly system for SFG.
Strong yet light weight design, especially developed for precision aerobatic and extreme 3D flying
Highly prefabricated, experienced builders can have air ready in under a day
Removable wings
Laser engraved motor mounting position 
Designed for electric motor
Included servo extension wires and wing bags
Push pull rudder link for more precise and direct response

INCLUDED HARDWARE:

Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
Included wing bags
Included extension wires
Pre-prepared hinges ready to be installed and pre-mounted canopy
Wheels, axels and wheel pants
Included spinner

REQUIRED HARDWARE:

Powerplant: Dualsky GA1500 or Dualsky XM5050EA-14 or similar electric motor

Servos: 4 high torque medium size // Uses x1 per aileron, x1 for elevator and x1 for rudder

*Please note that the servo slots are designed to accept a medium size servo (35mm x 15mm)

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

PILOT-RC RECOMMENDED HARDWARE:

Servos: Pilot-Rc PW16AH (16Kg at 8,4v)
Servo arms: Pilot-Rc 1,2″ Aluminium arms (included with Pilot-Rc servos)
Electric Motor Combo: Pilot-RC Power Pack for 60″ plane (3D acrobatic)
Electric Motor & Servos Combo: Pilot-RC Power Pack for 60″ plane WITH servos (3D acrobatic)

Build information
COWL SIZE:

A: 203mm, B: 177mm, C: 210mm, D: 180mm

EXTENSION WIRE LENGTHS:
Throttle:
No extension required

Each aileron:
10cm
(to reach receiver direct)

Elevator:
70cm

Rudder:
70cm

*All these extension leads are included with the kit

CENTER OF GRAVITY:
142mm
Measured back from leading edge of the wing at the fuselage.

You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.