DLE Engine - DLE-111cc Gas Engine - DLE111

This is the DLE 111cc Gasoline Powered Engine with Electronic Ignition.    
                                                                               
       **DLE Engines made a running crankshaft change in April 2011.**         
            **The new versions start with serial number B4100.**               
                                                                               
FEATURES: Three crankshaft bearings-simple design for lighter weight           
          Aluminum alloy crankcase                                             
          Two V-type reed valve bottom induction system                        
          Fully automatic electronic ignition                                  
          Two year limited warranty through Hobby Services beginning at date   
            of purchase                                                        
                                                                               
INCLUDES: Engine, two spark plugs, standoffs, ignition, instruction manual     
            two mufflers                                                       
                                                                               
REQUIRES: 87 octane gasoline                                                   
          2-cycle oil, mix ratio for this engine is 30 parts gas to one part   
            oil and must be followed exactly for warranty consideration        
            and optimum performance                                            
          4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition   
            (separate receiver style pack can be used) (LiPo & LiFe requires   
            voltage regulator)                                                 
          Propeller and field equipment                                        
                                                                               
SPECS:      Engine;                                                            
          Output Power: 11.2 HP at 7,500 RPM                                   
          Best Performance RPM Range: 1,300 - 8,500                            
          Maximum RPM: 8,500                                                   
          Static Thrust: 25.5kg Pulling Force/100 meters altitude obtained with
            27x10 type C propeller                                             
          Displacement: 6.8cu in (111cc)                                       
          Bore: 45mm                                                           
          Stroke: 35mm                                                         
          Compression Ratio: 7.6:1                                             
          Weight: Engine, 5.5lbs (2500g)                                       
                  Muffler, 3.5oz (100g) two cans included                      
                  Ignition, 5.6oz (160g)                                       
          Gasoline/Oil Mixture: 30:1                                           
          Gasoline Octane Rating: 87                                           
          Recommended Propellers: 26x12, 28x10                                 
          Spark Plugs: CM6                                                     
            Carburetor;                                                        
          Low Speed Needle: 1.25 turns from closed                             
          High Speed Needle: 1.5 turns from closed-both needles preset at      
            factory                                                            
                                                                               
          Distance between Mounting Hole Centers Width Wise: 2.8" (71mm)       
          Distance between Mounting Hole Centers Height Wise: 3.2" (81mm)      
          Distance between Muffler Mounting Hole Centers: 1.6" (40mm)          
          Total Width Including Both Cylinder Heads: 10.1" (258mm) not         
            including spark plugs                                              
          Length from Mounting Plate Bottom to Carburetor: 6.5" (165mm)        
          Length from Mounting Plate to Prop Washer: 6.6" (167mm)              
          Length from Mounting Plate to Front Bearing: 5.5" (139mm)            
                                                                               
COMMENTS: To avoid permanent damage to the electronic ignition system, NEVER   
            turn your DLE engine over with the system switched on and the plug 
            not installed.