31% 92" Edge 540 V3 50-60cc Red Print ARF
The Edge 540 is well known for being one of the most aggressive full size aircraft ever made. Pilot-RC’s version takes that into the model with massively powerful flying surfaces and fast responses. Contrary to most Edge’s on the market, our version has been extensively tested to assure that it is still a smooth flying plane despite its crazy side!
This is the V3 of the Zivko Edge with slicker lines that make it look like its really travelling while still standing still, and with the included optional winglets make it really stand out from the crowd.
The high degree of prefabrication direct from the factory and extra included accessories ensure that your Pilot RC bird goes together fast with precision and beauty.
|Model:||Edge 540 V3 – 31%|
|Wingspan:||92″ (2.340mm) – Without winglets|
|Wing area:||1,520 “² (9,733 cm²)|
- Strong yet light weight design, specially developed for precision acrobatic and extreme 3D flying
- Included optional scale winglets, easily installed with just one screw
- Genuine German Oracover (Ultracote) covering and printed colour schemes
- Highly prefabricated, experienced builders can have air ready in under a day
- Pre-installed hinges (glued and pinned)
- Carbon reinforced wing and fuselage
- Internally mounted cowling – so no external screws exposed
- Large cowl can fit easily 70cc twin engines
- Removable rudder (as well as removable wings and stabs)
- Laser engraved motor mounting position and multiple servo locations available for Rudder setup (pull pull or direct push pull)
- Crash kit: FREE laser cut repair wood for any Pilot-RC plane, just pay shipping
- Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
- Pre-installed hinges and pre-mounted canopy
- Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
- Wheels, axels and wheel pants
- Pre-preared pull-pull wires and pushrods with ball links
- Matching carbon spinner
Motor: 60-70cc or equivalent electric
Servos: 5 high torque (minimum 20kg) plus throttle // Uses x1 per aileron, x1 per elevator and x1 on rudder
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.
PILOT-RC RECOMMENDED HARDWARE:
- Servos: Pilot-Rc PW27AH (27Kg – 0,119s at 8,4v)
- Servo arms: Pilot-Rc 1,6″ Aluminium arms (included with Pilot-Rc servos)
COLOUR SCHEMES 540V3-09:
References: Oracover 21-023, 21-071 / Ultracote HANU866, HANU874